User Instructions

 

1. Gently position and roll two layers of orthopedic padding over the stockinette for protection. Do not roll the padding too tightly, as the padding ensures normal breathing of the skin.
2. Wear a pair of surgical gloves to prevent the polyurethane to touch your skin, and open the VIAN Cast pouch properly.
3. Immerse the roll in water (21~24c) and squeeze the roll 2-3 times to remove excess water*.
4. Wrap the VIAN Cast around the injured parts with 2~3 layers, overlap the previous layer by one-half or two- thirds the width of the roll and maintain the proper tension.
5. Shape the wrapped cast as necessary, make it smooth and rub the surface to achieve good contact between layers.
6. Please note that the cure time is approximately 4 minutes so you should wrap the roll within this time, as 20 minutes later the cast reaches peak strength.

Notes:

* Kindly note that warm water speeds the cure time, and cold water slows the process down.
* A maximum water temperature of 28 degrees Celsius is recommended.

Precautions:

• Before opening the packaging, ensure that the rolls are soft and flexible. Do not open any hard rolls under any circumstances.
• Polyurethane resin can cause damage to the skin, eyes, and hair, so it is highly recommended to avoid direct contact with the orthopedic band without protection.